12
Angle adjustment
The angle of the fan can be adjusted manually.
Simply tilt the guard up or down.
Fuse replacement
The product requires a 5 A 125 V fuse.
• If the product loses power and you suspect that the fuse has blown,
unplug the power plug.
• Slide the cover towards the prongs of the plug.
• Remove the blown fuse and replace it with an identical fuse.
• Slide the cover back to close the fuse compartment.
Cleaning and Maintenance
Risk of electric shock! To prevent electric shock, unplug before cleaning.
Risk of electric shock! During cleaning do not immerse the electrical parts
of the product in water or other liquids. Never hold the product under running
water.
Cleaning
• To clean, wipe with a soft, slightly moist cloth.
• Regularly remove dust and dirt from the guards using a vacuum cleaner.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to
clean the product.
NOTICE
WARNING
WARNING
To Next Page
Loading...
Need help?
General
