6
Intended Use
• This product is intended for temporarily heating residential rooms.
• This product is intended for household use only. It is not intended for commercial use.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or non-compliance with
these instructions.
Before First Use
• Check for transport damages.
• Before connecting the product to the power supply, check that the power supply voltage and
current rating corresponds with the power supply details shown on the product rating label.
• Remove the protective strip from the remote control’s battery compartment.
Risk of suffocation! Keep any packaging materials away from children – these
materials are a potential source of danger, e.g. suffocation.
Operation
The product can be operated via the control panel on the main unit, or the
remote control. Point the remote control towards the IR receiver in the lower
left corner of the front grill (A).
Connection
Connect the power plug (G) to a suitable wall outlet.
Once connected to the power supply the power indicator (B) lights up.
Switching on/off
• To switch on the product, press the power button (C). The thermostat indicators (F) light up.
• To switch off the product, press the power button (C) twice.
After switching off, the power indicator (B) blinks and the product blows cold
air for 60 seconds to cool down. When the cooldown is complete, the fan
stops and the power indicator (B) lights up continuously.
DANGER
NOTICE
NOTICE
NOTICE
To Next Page
Loading...
Need help?
General
