17
EN
• Press the RESET button (P) again. The indicator on the power
plug (O) lights up again and the product is ready for use.
NOTICE
If the indicator on the power plug (O) does not light up,
consult a specialist before using the product.
Installing/replacing the batteries
NOTICE
The batteries are not provided. Use 2 x 1.5 V type
AAA/LR03 batteries.
Switching on/off
To switch on/off the product, press the on/off button (10) either on
the remote control or on the control panel.
Mode control
To set the mode, press the mode button (7). The active mode is indicated
by the mode indicator (6).
Icon
control panel
Icon
remote control
Description
Auto: Depending on the set
target temperature and the
room temperature, the product
automatically switches between
cooling mode and fan mode. The
fan speed cannot be regulated
manually.
Cool: Airflow with cooling.
Dry: In this mode the product
mainly has a dehumidifying function.
There will be a little unavoidable
cooling effect on the room too.
The fan speed cannot be regulated
manually.
Fan: Airflow only.
Fan control
To set the fan mode, press the fan button (12). The fan speed is
indicated by the fan speed indicator (13).
To Next Page
Loading...
Need help?
General
