6
Note: Your speaker stays in pairing mode for 3 minutes or
until you pair a device. If you do not pair a device within
3 minutes, your speaker exits pairing mode and the LED
ashes slowly. To start pairing mode again, press the
function
button once.
Pairing another device or reconnecting to a paired device
1. Disconnect from the previous device by pressing and
holding the function
button for 1 to 3 seconds. A tone
sounds, the LED blinks quickly, and your speaker enters
pairing mode.
2. Repeat the pairing steps for your next device.
Note: You can pair multiple devices but you can only have one
device actively paired at a time.
To Next Page
Need help?
General
