Need help?Do you have a question about the Amazone EDX 6000 TC and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | EDX 6000 TC |
| Category | Farm Equipment |
| Language | English |
Outlines operator and user obligations for safe implement use and liability.
Explains the meaning of safety symbols like DANGER, WARNING, CAUTION, IMPORTANT, and NOTE.
Specifies requirements for personnel operating and maintaining the implement.
Details the structure and explanation of warning symbols on the machine.
Explains risks from non-compliance, including warranty loss.
Provides warnings and cautions regarding operational safety and specific actions.
Reinforces compliance with national regulations and warning signs for safety.
Covers general safety and requirements for loading/unloading with a tractor.
Details the step-by-step process for loading the implement onto a transport vehicle.
Details the step-by-step process for unloading the implement from a transport vehicle.
Defines the intended use of the implement and warns against improper use.
Identifies hazardous zones and points on the implement during operation.
Provides detailed technical specifications for the implement, including seeding rates.
Describes the implement's service brake system options (pneumatic, hydraulic).
Describes the AMATRON 3 control terminal, its functions, and data it determines.
Explains how to actuate hydraulic functions using the AMATRON 3 and tractor control units.
Explains the process of seed singling and spreading, including hopper features.
Describes the blower fan's role in seed singling and fertiliser delivery and its drive options.
Explains the structure and function of the double disc coulter.
Details how to adjust the seed placement depth using a spindle and check it.
Explains how to adjust and read the coulter pressure for proper seed placement.
Details the fertiliser metering roller, electric motor, and injector sluice function.
Explains how to adjust fertiliser quantity via the metering roller and AMATRON 3.
Outlines when and how to perform a calibration test for fertiliser spread rates.
Describes the single disc fertiliser coulter, its suitability, and depth adjustment.
Lists requirements for tractor suitability, including hydraulic output and weight.
Explains how to calculate total weight, axle loads, and minimum ballast, with specific notes for Germany.
Provides the formula and steps for calculating minimum front ballast for steering capability.
Lists requirements for tractor connection devices and weight limits.
Covers regulations and weight/speed requirements for implements without brakes.
Details critical steps to secure the tractor and implement before any intervention.
Details the procedure for correctly coupling brake and supply lines, including warnings.
Provides instructions for safely disconnecting supply and brake lines.
Covers safety warnings and conditions for the hydraulic brake system.
Details the steps for coupling the hydraulic service brake system, including connector cleaning.
Provides instructions for safely uncoupling the hydraulic service brake system.
Covers critical safety warnings and procedures for coupling the implement to the tractor.
Details critical safety measures and procedures for uncoupling the implement from the tractor.
Provides instructions and safety warnings for coupling the hydraulic pump to the PTO shaft.
Details the steps for connecting the hydraulic pump to the tractor's PTO shaft.
Provides instructions for safely uncoupling the hydraulic pump from the PTO shaft.
Covers setting implement parameters on the AMATRON 3 for seed metering.
Explains how to set the implement type, units, row spacing, and grain quantity on AMATRON 3.
Details adjusting seed placement depth via a spindle and checking/correcting it.
Explains how to adjust coulter pressure using a valve screw for correct seed placement.
Provides steps to check seed placement depth and grain spacing, and recalibrate if needed.
Introduces fertiliser metering and application settings.
Details the procedure for installing and removing the fertiliser metering roller.
Guides through setting fertiliser rate using a calibration test and AMATRON 3.
Explains how to adjust fertiliser placement depth by modifying coulter pressure.
Explains how to adjust track marker length and working intensity for different soil types.
Covers adjusting fan speed, including warnings about maximum speed.
Provides critical steps and warnings for preparing the implement for road transport.
Covers national road traffic and accident prevention regulations, transport width/height, and speed limits.
Details safety precautions and procedures for folding and unfolding implement sections and track markers.
Provides step-by-step instructions for unfolding the implement sections.
Details the procedure for folding the implement sections, including track markers.
Covers moving tractor wheel mark eradicators into working and transport positions.
Provides safety instructions and procedures for filling the hoppers.
Details the steps for safely filling the seed hopper.
Details the steps for safely filling the fertiliser hopper.
Provides instructions and safety warnings before starting implement operation, especially PTO shaft use.
Covers monitoring operation, checking distributor heads, and turning at field ends.
Presents a schedule for maintenance tasks based on operating hours and intervals.
Covers exterior inspection and pressure checks of the compressed air tank.
To Next Page