Need help?Do you have a question about the Amazone Cirrus Series and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | Cirrus Series |
| Category | Farm Equipment |
| Language | English |
Explains the manual's objectives: describing machine operation, maintenance, and safe handling.
Clarifies that directions in the manual are given from the direction of travel.
Details the operator's responsibilities and the manufacturer's liability.
Explains the meaning of different safety symbols used in the manual and on the machine.
Provides essential safety guidelines for operating the machine and connected tractor.
Details safety aspects and procedures related to the machine's brake system.
Step-by-step instructions for safely loading the Cirrus machine onto a transport vehicle.
Step-by-step instructions for safely unloading the Cirrus machine from a transport vehicle.
Identifies and describes the main components and subassemblies of the machine.
Presents key technical specifications and data for the Cirrus machine models.
Outlines the required tractor specifications for operating the Cirrus machine.
Describes the functions and operation of the AMATRON 3 operator terminal.
Explains the seed dosing system, including roller selection and calibration.
Details the process of creating tramlines using the machine's settings.
Guides on verifying tractor compatibility and requirements for safe operation with the machine.
Outlines critical safety measures to prevent accidental movement during maintenance.
Provides instructions for safely connecting the machine to the tractor.
Explains the connection procedures and markings for hydraulic hoses.
Details how to connect the pneumatic service brake system between tractor and machine.
Provides instructions for safely disconnecting the machine from the tractor.
Details the procedure for calibrating and setting the correct sowing rate.
Explains how to adjust coulter pressure for optimal seed planting depth.
Guides on adjusting the exact harrow for proper soil coverage and smoothing.
Instructions for folding the machine's extension arms for transport.
Critical safety and procedural steps for filling the seed hopper.
Provides guidance on starting operations, including safety and initial checks.
Details essential checks to perform after initial operation or soil changes.
Steps to follow to properly conclude operations at the end of the field work.
Procedures for safely emptying the seed hopper and dosing unit.
Explains the warning message for low seed volume and its implications.
Procedures to follow in case of AMATRON 3 failure during operation.
A comprehensive table listing faults, their possible causes, and remedies.
Presents a comprehensive schedule for machine maintenance and servicing intervals.
Covers important safety and maintenance procedures for the hydraulic system.
Details the dual-circuit pneumatic and hydraulic braking systems and their maintenance.
Lists specified tightening torques for various bolts and nuts on the machine.
Provides a schematic diagram of the hydraulic system for the Cirrus 3002 Special.
Provides a schematic diagram of the hydraulic system for the Cirrus 4002 / 6002.
To Next Page