6.1.1.7 Table
Actual value according to
calculation
cording to tractor
instruction manual
load capacity (two
tyres)
Minimum ballast front /
rear
/
kg
--
--
Total weight kg
≤
kg
--
Front axle load kg
≤
kg
≤
kg
Rear axle load kg
≤
kg
≤
kg
• You can find the approved values for the total tractor weight,
axle loads and load capacities in the tractor registration papers.
The actually calculated values must be less than or equal to
( ≤ ) the permissible values!
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
through insufficient stability and insufficient tractor steering and
brake power.
It is forbidden to couple the machine to the tractor used as the basis
for calculation, if
• one of the actual, calculated values is greater than the approved
value.
• there is no front weight (if required) attached to the tractor for the
minimum front ballast (G
V min
).
You must use a front weight, which is equal to at least the required
minimum front ballast (G
V min
).
98 Cirrus BAH0049-1 09.14
To Next Page
Loading...
Need help?
General
