Amazone Cirrus Series - Loading the Cirrus

Loading and unloading
3.1 Loading the Cirrus
1. Put the Cirrus in its transport position.
2. Raise the Cirrus via the integrated running
gear up to a middle position.
3. Push the Cirrus carefully backwards onto
the transport vehicle.
A marshalling person is required for load-
ing.
Fig.
16
4. Lower the Cirrus fully as soon as the Cirrus
has reached its transport position on the
transport vehicle.
Fig.
17
5. Secure the Cirrus in compliance with regu-
lations.
Bear in mind that the Cirrus has no parking
brake.
Additionally clamp the booms of the folda-
ble machines at the lugs (
Fig. 18/1).
6. Disconnect the tractor from the machine.
Fig.
18
42 Cirrus BAH0049-1 09.14