To Next PageTo Next Page
Need help?Do you have a question about the Amazone Cayros Series and is the answer not in the manual?
General| Tractor Power Requirement | 80-120 hp |
|---|---|
| Working Width Adjustment | Hydraulic |
| Disc Diameter | Varies depending on model |
| Required Tractor Power | 80-120 hp |
| Weight | 1000 kg |
Details about the implement's identification plate and required information for inquiries.
Defines the intended use of the implement and limitations for agricultural work.
General safety guidelines and imperative instructions for safe operation.
Rules and regulations to prevent accidents and ensure operator safety.
Explanation and identification of warning symbols and labels on the equipment.
Details on different models, their specifications, and tractor compatibility.
Provides specific technical data for various plough models and configurations.
Guidance on calculating crucial weight and load values for safe tractor-plough operation.
Steps and checks required for preparing the tractor before attaching the plough.
Instructions for initial setup and preparation of the plough itself.
Step-by-step instructions for correctly mounting the plough onto the tractor.
Detailed procedure for safely removing the plough from the tractor.
Information on connecting and managing hydraulic hoses for implement operation.
Procedure for turning the plough using a double-acting automatic cylinder.
Operation details for turning the plough with hydraulic beam pivoting.
Instructions for adjusting the plough's cutting width mechanically.
Procedure for adjusting cutting width infinitely via hydraulic control.
Guidance on rough adjustment of the front furrow width using tractor controls.
How to adjust the working depth of the plough using various methods.
Steps for setting the pitch angle of the plough using adjusting spindles.
Adjusting the pulling point to ensure no lateral pull on the tractor.
Fine-tuning the front furrow adjustment for optimal ploughing.
Instructions for adjusting the disc coulters on the plough.
Setting and adjustment guidelines for the fertiliser skimmer.
Adjustment of the swivel arm for supporting a packer in working and transport positions.
Procedure for moving the transport pendulum support wheel into transport position.
Requirements for lighting and warning equipment during road transport.
List of shear bolt types and sizes used for overload protection.
Explanation of shear bolt function and replacement procedure.
Description and operation of the SEMI-automatic stone release system.
Details on the automatic hydraulic stone release mechanism.
Guidelines for cleaning the implement, including specific warnings.
Instructions for proper storage and protection of the implement during off-season.
Overview of routine maintenance tasks and intervals for the implement.
Procedure for inspecting shares and other wear parts for damage or wear.
Instructions on how to check and tighten shear bolts for safety.
Guidance on checking the support wheel, including bearing clearance.
Maintenance and safety instructions related to the implement's hydraulic system.
Table of specified tightening torques for various screw sizes.
