Cayros BAG0172.7
7.7 Precise front furrow adjustment
For precise front furrow adjustment on the field, observe the following:
• Make the adjustments at a standstill.
• Relieve the slide block guide using the tractor rear hydraulic
system.
To do so, lift the plough out of the furrow and put it back down
lightly, so that the slide block guide is relieved as much as
possible.
Adjust the front furrow mechanically using the spindle or hydraulically
using the tractor control unit.
Depending on the field depth and pitch setting,
the cutting width of the first body S1 is adjusted
using the slide block guide F by means of a
setting spindle V so that it corresponds to the
respective cutting width of the next body S.
To Next Page
Loading...
