Cayros BAG0172.7
8 Road transport
WARNING
Cayros V
Danger during transport due to unintentional swivelling out of
the machine or machine parts!
Observe the maximum transport width. Before road transport, move
the plough into transport position.
Procedure for ploughs with transport
pendulum support wheel:
1. Move transport swing support wheel (R
transport position - see transport swing
support wheel, front and rear.
2. Set the transport locking mechanism V (on
the plough mounting body) into locking
position (swivel the lever).
3. Turn the plough into horizontal position
(turning cylinder completely retracted) and
ensure that the transport locking
mechanism V latches in.
4. Unhook the top link O and ensure that
lateral movement of the lower links U is
greatly restricted or prevented completely!
The maximum permissible forward speed for road transport with a
transport pendulum wheel must not exceed 25 km/h!
Packer arm
WARNING
Before road transport, move the packer arm into transport
position.
Tyre pressure
• Ensure correct tyre inflation pressure! Check air pressure
regularly.
Tyres are at risk of bursting during inflation and if tyre
pressure is too high!
For safety reasons, the specified maximum inflation
pressure values must not be exceeded!
Depending on the respective wheel (tyre and rim), maximum
air pressure values must be observed:
To Next Page
Loading...
