Cleaning, maintenance and repair
BAG0172.7 02.20
10.2 Storage / overwintering
• After use, clean the implement with a normal water jet (oiled
implements should only be cleaned on washing sites with oil
separators).
Dirt attracts moisture and leads to the formation of rust.
• Protect uncoated parts (e.g. plough body, piston rod) against
rust with a corrosion protection agent (use only biodegradable
preservatives).
• Do not spray the implement with aggressive, oily media for
preservation.
• Repair paint damage to protect from corrosion!
• Park the implement protected from the weather, but not close to
mineral fertilisers / salts or in stables.
• Grease all lubrication points and wipe off emerging grease.
To Next Page
Loading...
