Cayros BAG0172.7
2 Safety first
2.1 Safety instructions
It is imperative that the following instructions be observed:
1. When uncoupling plough from tractor, ensure that the stand
support is properly clamped!
2. Road transport with transport swing support wheel:
When transporting on public roads, road traffic regulations must
be observed! On transport journeys with transport swing support
wheel, the tractor's toplink must be dismounted.
Furthermore, when driving with the transport swing support
wheel, the rear plough must be locked using the transport
locking mechanism (located at the front on the headstock)!
3. For plough types M850, M950, M1020 of a 4-furrow design and
above, XM850, XM950, XM1050, XMS850
XS850, XS950, XS1050, XS1150, XSPro 850, XSPro 950,
XSPro 1050 and XSPro 1150 of a 5-furrow design and above
(shear pin, SEMI or automatic stone release), a transport swing
support wheel must be used for all transport journeys
→ Service life of plough reversing mechanism!
RISK OF ACCIDENT!
4. To avoid damage to the transport wheel caused by the disc
coulters when pushing back in transport position, these disc
coulters must be moved up to the stop (near coulter shaft)!
5. For all plough types of 4-furrow design and above, a mounting
axle of Cat. II/36 or III/36 (= pin diameter Ø36 mm or ball
diameter Ø64 mm) is always prescribed.
Pin diameter Ø28 mm or ball diameter
Ø56 mm is prohibited ! RISK OF ACCIDENT!
To Next Page
Loading...
