Amazone Cayros Series - Mounting and Dismounting the Plough

Table of Contents
26
Cayros BAG0172.7
02.20
5 Mounting and dismounting the plough
As a rule:
• The plough may only be mounted on the tractor's lifting gear
using original parts with matching connection size (Category 2
or
3).
•
Before mounting or dismounting the plough on the tractor's lifting
gear, move the control lever for the hydraulic system to a
position where unintentional lifting or lowering of the three-point
linkage is ruled out.
• When mounting or dismounting the plough on the tractor and
when operating the lifting gear, ensure that there is nobody
standing between plough and tractor
• There must be nobody standing between the tractor and
implement unless the tractor is secured by the parking brake
and/or wheel chocks to prevent it from rolling away. Switch off
engine, remove ignition key
• There is a risk of tipping when the plough is
being dismounted. It
is therefore essential that the implement be secured with stand
supports.
•
The plough must only be mounted and dismounted on firm, level
ground