Cayros BAG0172.7
• When connecting the hydraulic hose lines to the hydraulic
sys
tem of connected machines, ensure that the hydraulic system
is depressurised on both the drawing vehicle and the trailer.
• Ensure that the hydraulic hose lines are connected correctly.
• Regularly check all the hydraulic hose lines and couplings for
damage and impurities.
• Have the hydraulic hose lines checked at least once a year by a
specialist for proper functioning.
• Replace the hydraulic hose line if it is damaged or worn. Only
use genuine AMAZONE hydraulic hose lines.
• The hydraulic hose lines should not be used for longer than six
years. This period includes any storage time of a maximum of
two years. Even with proper storage and approved use, hoses
and hose connections are subject to natural ageing, thus limiting
the length of use. However, it may be possible to specify the
length of use from experience values, in particular when taking
the risk potential into account. In the case of hoses and hose
connections made from thermoplastics, other guide values may
be decisive.
• Dispose of old oil in the correct way. If you have problems with
disposal, contact your oil supplier.
• Keep hydraulic fluid out of the reach of children!
• Ensure that no hydraulic fluid enters the soil or waterways.
10.7.1 Labelling hydraulic hose lines
Valve chest identification provides the
following information:
(1) Manufacturer's marking on the hydraulic
hose line (A1HF)
(2) Date of manufacture of the hydraulic hose
lines (02 04 = February 2004)
(3) Maximum approved operating pressure
(210 BAR).
To Next Page
Loading...
