BAG0172.7 02.20
7.2 Infinitely variable hydraulic cutting width adjustment
The infinitely variable cutting width adjustment is
performed using the double-
unit.
The scale displays the set cutting width.
Infinitely variable cutting width adjustment is
possible in a range between 32 and 52 cm (for
VARIO 850) and 35 –
1050). With precise plough adjustment (precise
pulling point adjustment and precise track
adjustment with a cutting width of 40 cm), there
is no need to readjust any of the setting
parameters. When adjusting the cutting width,
both the pulling point and the cutting width of the
1st body are also automatically adjusted with the
lateral movement of the lower link.
To Next Page
Loading...
