Amazone Cayros Series - Calculation of the Actual Total Weight of the Tractor; Implement Combination; Calculation of the Actual Tractor Rear Axle Load T; H Act; Tyre Carrying Capacity

Table of Contents
22
Cayros BAG0172.7
02.20
4.1.2 Calculation of the required minimum front ballast G
V min
of the tractor to
ensure safe steering
ba
bT
bT
d
cG
G
L
VH
V
+
••+
•−
+
•
=
2,
0
)(
min
Enter the numeric value for the calculated minimum ballast G
V min
,
required on the front side of the tractor, in the table (section 4.1.7).
4.1.3 Calculation of the actual tractor front axle load T
V act
b
dcGbTbaG
T
HVV
tat
V
)()( +•−•++•
=
Enter the numeric value for the calculated actual front axle load and
the approved tractor front axle load specified in the tractor operating
manual in the table (section 4.1.7).
4.1.4 Calculation of the actual total weight of the tractor/ implement combination
HLV
tat
GTGG ++=
Enter the numeric value for the calculated actual total weight and the
approved total tractor weight specified in the tractor operating manual
in the table (section 4.1.7).
4.1.5 Calculation of the actual tractor rear axle load T
H act
tatV
tat
tatH
TGT −=
Enter the numeric value for the calculated actual rear axle load and
the approved tractor rear axle load specified in the tractor operating
manual in the table (section 4.1.7).
4.1.6 Tyre carrying capacity
Enter the double value (two tyres) of the approved load capacity (see,
for example, tyre manufacturer's documentation) in the table (section
4.1.7).