Amazone Cayros Series - Checking the Condition of the Shares and Wear Parts; Checking the Shear Bolts

Cleaning, maintenance and repair
Cayros
BAG0172.7 02.20
59
10.4 Checking the condition of the shares and wear parts
Replace worn shares and mould boards promptly
to prevent damage to the frogs or supporting
parts. The same applies to leading tools, if
equipped
10.5 Checking the shear bolts
Check the bolts for tightness.
Required tightening torque for the bolts:
(1) Shear:
M14x39 12.9 (B03)
190+20 Nm
(2) Chisel:
M12x40 12.9 (B03)
120+10 Nm