6.1.1.2 Calculation of the required minimum ballasting at the front G
V min
of the tractor for
assurance of the steering capability
ba
bTbTcF
G
LVH
V
+
••+•−•
=
2,0
min
Enter the numeric value for the calculated minimum ballast G
V min
,
required on the front side of the tractor, in the table (section 6.1.1.7).
6.1.1.3 Calculation of the actual front axle load of the tractor T
V tat
b
cFbTbaG
T
HVV
tat
V
•−•++•
=
)(
Enter the numeric value for the calculated actual front axle load and
the approved tractor front axle load specified in the tractor operating
manual in the table (section 6.1.1.7).
6.1.1.4 Calculation of the actual total weight of the combined tractor and machine
Enter the numeric value for the calculated actual total weight and the
approved total tractor weight specified in the tractor operating manual
in the table (section 6.1.1.7).
6.1.1.5 Calculation of the actual rear axle load of the tractor T
H tat
Enter the numeric value for the calculated actual rear axle load and
the approved tractor rear axle load specified in the tractor operating
manual in the table (section 6.1.1.7).
6.1.1.6 Tyre load capacity
Enter the double value (two tyres) of the approved load capacity (see,
for example, tyre manufacturer's documentation) in the table (section
6.1.1.7).
Cirrus BAH0049-1 09.14
97
To Next Page
Loading...
Need help?
General
