Amazone Cirrus Series - Uncoupling the Hydraulic Pump

Coupling and uncoupling the machine
7.3.2 Uncoupling the hydraulic pump
DANGER
•
Switch off the tractor's universal joint shaft, apply the park-
ing brake, shut down the tractor engine and remove the ig-
nition key.
•
The hydraulic pump contains hot components that may
cause burns. Wear gloves.
1. Park the machine on level, solid ground.
2. Disengage the tractor's universal joint shaft, engage the parking
brake, shut off the engine and remove the ignition key.
Wait until the universal joint shaft stops moving.
3. Remove the hydraulic pump from the tractor's universal joint
shaft.
Cirrus BAH0049-1 09.14
115