General Safety Instructions
2.14 Dangers if the safety information is not observed
Nonobservance of the safety information
• Can pose both a danger to people and also to the environment
and machine.
• Can lead to the loss of all warranty claims.
Seen individually, non-compliance with the safety information could
pose the following risks:
• Danger to people through non-secured working areas.
• Failure of important machine functions.
• Failure of prescribed methods of maintenance and repair.
• Danger to people through mechanical and chemical impacts.
• Risk to environment through leakage of hydraulic fluid.
2.15 Safety-conscious working
Besides the safety information in this operating manual, the national
general workplace safety and accident prevention regulations are
binding.
Comply with the accident prevention instructions on the warning pic-
tograms.
When driving on public roads and routes, comply with the appropriate
statutory road traffic regulations.
30 Cirrus BAH0049-1 09.14
To Next Page
Loading...
Need help?
General
