3 Loading and unloading
Loading and unloading with a tractor
WARNING
There is a risk of an accident when the tractor is unsuitable and
the machine brake system is not connected to the tractor or is
filled.
• Correctly couple the machine to the tractor, before loading the
machine onto a transport vehicle or unloading it from a
transport vehicle.
• You may only couple and transport the machine with a tractor
for loading and unloading, as long as the tractor fulfils the pow-
er requirements.
• Compressed air brake system:
Only move off with the machine connected when the pressure
gauge on the tractor shows 5.0 bar!
Connect the Cirrus to a suitable tractor for load-
ing onto or unloading off a transport vehicle.
Make the following connections on the tractor
• all service brake connections
• all hydraulic connections
• the free return line of the hydraulic fan con-
nection.
Connection of the control terminal AMATRON 3
is not required.
g. 15
WARNING
A marshalling person is required for the loading and unloading.
Cirrus BAH0049-1 09.14
41
To Next Page
Loading...
Need help?
General
