Hydraulic system
Maximum operating pressure:
At least 80 l/min at 150 bar
Transmission/hydraulic fluid Utto SAE 80W API GL4
The machine hydraulic/transmission fluid is suitable for the combined
hydraulic/transmission fluid circuits of all standard makes of tractor.
Double-acting control unit
Double-acting control unit
• 1 single-acting or double-acting control unit with priority control
for the feed line
• 1 unpressurised return line with a large push-fit coupling (ND
for the unpressurised oil return line. In the return line the bank-
ing-up pressure must be 10 bar at the maximum.
Operational brake system
• Dual-circuit service brak-
ing system:
• 1 hose coupling (red) for the supply line
• 1 hose coupling (yellow) for the brake line
braking system:
1 hydraulic coupling in accordance with ISO 5676
The hydraulic braking system is not allowed in Germany and several
other EU countries!
4.10 Noise production data
The workplace-related emission value (acoustic pressure level) is 74
dB(A), measured in operating condition at the ear of the tractor driver
with the cabin closed.
Measuring unit: OPTAC SLM 5.
The noise level is primarily dependent on the vehicle used.
Cirrus BAH0049-1 09.14
57
To Next Page
Loading...
Need help?
General
