5.19.2 Tramline rhythm 4, 6 and 8
Figure (Fig. 95) shows examples for creating tramlines with the tram-
line rhythm 4, 6 and 8.
It shows work with the seed drill at half width (partial width) during the
first field trip.
During work with partial width switched off, the drive of the appropri-
ate dosing roller is interrupted. Please refer to the instruction manual
for an exact description AMATRON 3.
On the Cirrus 3002/4002-2 it is not possible to switch a part of the
width.
Another option for creating tramlines with the tramline
rhythm 4, 6 and 8 is to begin with the full working width and the crea-
tion of a tramline (see Fig. 96).
In this case, the care machine works at half working width during the
first field run.
After the first field run, reset the full machine working width!
Fig. 96
90 Cirrus BAH0049-1 09.14
To Next Page
Loading...
Need help?
General
