General Safety Instructions
2.16.9 Cleaning, maintenance and repairs
• Only carry out cleaning, maintenance and repair work on the
machine when:
ο The drive is switched off
ο The tractor engine is at a standstill
ο The ignition key has been removed
ο The machine's connector has been disconnected from the
on-board computer!
• Regularly check the nuts and bolts for a firm seat and retighten
them as necessary.
• Secure the raised machine and/or raised machine parts against
unintentional lowering before performing any cleaning, mainte-
nance or repair work on the machine!
• When replacing work tools with blades, use suitable tools and
gloves.
• Dispose of oils, greases and filters in the appropriate way.
• Disconnect the cable to the tractor generator and battery, before
carrying out electrical welding work on the tractor and on at-
tached machines.
• Spare parts must meet at least the specified technical require-
ments of AMAZONEN-WERKE! This is ensured through the use
of original AMAZONE spare parts.
40 Cirrus BAH0049-1 09.14
To Next Page
Loading...
Need help?
General
