EasyManua.ls Logo

Amazone ZA-M 900 User Manual

Amazone ZA-M 900
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
$0$=21(
Operation Manual
ZA-M 900, 1200, 1500
MG 898
DB 567 (GB) 08.03
Printed in Germany
a
Before starting to oper-
ate, please carefully
read and adhere to this
operation manual and
safety advice

Table of Contents

Other manuals for Amazone ZA-M 900

Question and Answer IconNeed help?

Do you have a question about the Amazone ZA-M 900 and is the answer not in the manual?

Amazone ZA-M 900 Specifications

General IconGeneral
BrandAmazone
ModelZA-M 900
CategoryFarm Equipment
LanguageEnglish

Summary

1. Details About the Machine

1.1 Range of Application

Specifies the intended use for dry, granular, prilled, and crystalline fertilizers and seeds.

1.2 Manufacturer and Compliance

Provides manufacturer details and conformity declarations for the machine.

1.4 Ordering Information & Type Plate

Guides on ordering parts and explains the importance of the type plate.

1.6 Technical Data

Presents detailed specifications including capacity, weight, dimensions, and working widths.

1.7 Designated Use & Limitations

Defines the approved operational limits and prohibited uses of the spreader.

2. Safety

2.1 Dangers of Non-Compliance

Highlights potential risks and consequences of ignoring safety guidelines.

2.2 Operator Qualification & Safety Symbols

Specifies operator requirements and explains manual safety symbols and pictographs.

2.5-2.6 General Safety Practices

Emphasizes safe operation, adherence to regulations, and general accident prevention.

2.7-2.9 Safety for Mounted Systems

Covers safety for implements, hydraulics, maintenance, PTO shafts, and electronics.

3. Product Description

3.1 Assembly & Safety Features

Lists assembly components and details the machine's integrated safety features.

3.3 Spreader Functionality

Explains how the fertilizer spreader operates, including spreading discs and vanes.

3.4 On-Board Computer Options

Describes the functionality of optional AMATRON or AMADOS II D on-board computers.

3.5 Danger Zones

Identifies hazardous areas on the machine during operation and maintenance.

3.6 Spreading Disc Comments

Provides specific information and comments regarding OM 10-12 and OM 10-16 spreading discs.

5. Mounting and Dismounting

5.1 Mounting Data & Calculations

Provides essential data and calculations for correctly mounting the spreader to the tractor.

5.2 Mounting Procedures

Details the step-by-step procedure for attaching the broadcaster to the tractor's three-point linkage.

5.3 Hydraulic & PTO Shaft Connections

Explains hydraulic connections, Comfort package, and PTO shaft fitting procedures.

5.4-5.5 Road Transport Prep

Covers fitting traffic lights and safely uncoupling the spreader from the tractor.

6. Road Transport

6.1 Transport Adjustments

Details necessary adjustments for safe and legal road transport of the spreader.

7. Settings

7.1 Mounting Height Adjustment

Explains how to set the correct working height of the spreader in the field.

7.2 Late Top Dressing

Provides instructions for performing late top dressing operations in crops.

7.3 Spread Rate Configuration

Details methods for adjusting the fertilizer spreader's output rate using levers, charts, rules, and checks.

7.4 Working Width Adjustment

Explains how to adjust the machine for different working widths using discs and vane positions, including checks.

7.5 Border Spreading Methods

Explains eco-border, normal-border, and Limiter/Tele-Set disc spreading techniques.

8. Operation

8.1 Filling the Spreader

Provides instructions and precautions for safely filling the fertilizer hopper.

8.2 Spreading Operation

Details the steps for operating the fertilizer spreader during application.

8.3 Exchanging Spreading Discs

Explains the procedure for replacing the spreading discs on the machine.

8.4 Headland Broadcasting

Offers advice for accurate fertilizer distribution when working on field headlands.

8.5 Slug Pellet Spreading

Provides specific guidance for spreading slug pellets, including settings and precautions.

9. Cleaning, Maintenance, and Repair

9.1 Shear-Off Safety

Explains shear-off safety mechanisms for PTO and agitator shaft drives.

9.2 Spreading Vane & Swivel Blade Exchange

Details the process for replacing spreading vanes and swivel blades.

9.3 Hydraulic Hose Maintenance

Covers inspection, maintenance, and replacement of hydraulic hoses.

9.6 Shutter Slide Setting Check

Explains how to check and adjust the fundamental settings of the shutter slides.

9.7 PTO Shaft Dismantling

Details the procedure for safely removing the PTO shaft from the machine.

10. Faults

10.1 Faults, Causes, and Remedy

Lists common faults, their causes, and recommended solutions for general issues.

10.2 ZA-M Comfort Faults

Troubleshoots specific faults related to hydraulic systems and the ZA-M Comfort model.

10.3 Electrical Failure Operation

Provides guidance on continuing operation during electrical faults or job computer issues.

11. Options

11.1 Omnia-Set Spreading Discs

Details various 'Omnia-Set' spreading disc pairs for different working widths.

11.2 Tele-Set Border Spreading Discs

Describes 'Tele-Set' border spreading discs for precise application along field borders.

11.3-11.4 Boundary Spreading Devices

Explains the Limiter M and boundary deflector for controlled spreading at field edges.

11.5-11.6 Guard Tube & Calibration Device

Covers swivelable guard tubes and lateral calibration devices for safety and control.

11.7-11.8 Transport, Parking & Hopper Extensions

Details transport devices and hopper extensions to increase capacity.

11.9 Swivelable Hopper Cover

A hopper cover that guarantees dry spreading material and is easily swiveled upward for filling.

11.10 Traffic Light Kits

Provides details on front and rear traffic light kits for road transport compliance.

11.11-11.13 Hydraulic Control Units

Covers two-way valves, three-way valves, and mobile test kits for spreader control.

11.14 PTO Shaft with Friction Clutch

Recommends a PTO shaft with friction clutch for tractors with engaging PTOs to prevent damage.

11.15-11.17 Other Options

Lists specific PTO shaft models and a rubber mud guard option.

Related product manuals