EasyManua.ls Logo

Amazone ZA-M 3000 Ultra User Manual

Amazone ZA-M 3000 Ultra
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Centrifugal Broadcasters
AMAZONE ZA-M
1800 - 3000
Ultra
MH 450
DS 531 (GB) 09.04
Printed in Germany
Setting Chart
GB
Before starting work,
please carefully read
and adhere to the operator's
manual and safety advice.
Question and Answer IconNeed help?

Do you have a question about the Amazone ZA-M 3000 Ultra and is the answer not in the manual?

Amazone ZA-M 3000 Ultra Specifications

General IconGeneral
BrandAmazone
ModelZA-M 3000 Ultra
CategoryFarm Equipment
LanguageEnglish

Summary

In General

Explanation of Symbols

Explains symbols used in the manual, such as PTO speed and mounting height.

Advice on Flow Property Factors

Discusses factors influencing fertiliser spreading properties and the flow property factor.

Example of How to Use the Setting Chart

Setting the Mounting Height

Normal Fertilising Mounting Height

Details mounting height settings for normal fertilising, including crop growth adjustments.

Late Top Dressing Mounting Height

Specifies mounting height for late top dressing in crops up to 1m.

Setting the Spread Rate Manually

Shutter Slide Position for Non-Standard Speeds

Guidance on determining shutter slide position for speeds not listed in the chart.

Shutter Slide Position for Non-Standard Working Widths

Guidance on determining shutter slide position for working widths not listed.

Checking the Spread Rate

Calibration by Driving Distance

Method for checking spread rate by driving over a measured distance.

Calibration by Stationary Operation

Method for checking spread rate using stationary calibration with time measurement.

Setting the Spreading Vanes

Setting the Working Width

Adjusting spreading vanes to set the desired working width based on fertiliser type.

Special Advice for Slug Pellets

Specific instructions and precautions for applying slug pellets with the spreader.

Spreading Vane Settings for Slug Pellets

Provides specific vane settings for applying slug pellets with Omnia Set OM 24-48.

Border Spreading with Limiter Ultra

Shutter Slide Position for Spread Rates

Related product manuals