Need help?Do you have a question about the Amazone D9 3000 Super and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | D9 3000 Super |
| Category | Farm Equipment |
| Language | English |
Details operator and user obligations for safe handling and compliance with manual instructions.
Explains safety symbols (DANGER, WARNING, CAUTION, IMPORTANT, NOTE) and their meanings.
Emphasizes proper attachment and functional checks of safety equipment before each use.
Specifies that only trained and instructed personnel may operate or work on the implement.
Ensures safety and protection equipment is functional; daily check for visible damage.
Covers timely maintenance, securing media against unintentional start-up, and checking bolted connections.
Instructions for keeping warning symbols clean and legible, and their structure.
Highlights risks to people, environment, and warranty from non-compliance with safety information.
Covers operational safety, checking traffic safety, and handling of implement components.
Comply with national regulations, heed warning symbols, and ensure clear visibility.
Safety precautions for high-pressure hydraulic systems, including hose checks and maintenance.
Safety measures when working on the electrical system, including battery disconnection and fuse usage.
Observing filling quantities, using ladders, and paying attention to danger points during calibration.
Conditions for performing work: switched-off terminals, disconnected plugs, and secured parts.
Provides detailed technical specifications for the D9 Special seed drill models.
Offers detailed technical specifications for the D9 Super seed drill models.
How to set the seeding rate using the gearbox lever and hydraulic cylinder actuation.
Describes electronic seed rate adjustment using an electric motor and control terminal.
Provides a table of required setting values for various seeds, including metering wheel and shutter positions.
Covers the process of setting the seed rate using calibration tests and drive wheel rotation.
Method for determining the correct gearbox setting for the desired seed rate using a calculating disc.
Explains how to adjust exact following harrow pressure manually or hydraulically based on soil.
Information on creating tramlines as seed-free tracks for later fertilizing and plant care.
Ensures tractor suitability regarding weight, axle loads, steering, and braking power before coupling.
Explains calculation of tractor weights and loads for ensuring stability and steering capability.
Formula and method for calculating required front ballast weight for steering capability.
Formula and method for calculating the actual front axle load of the tractor.
Formula for calculating the actual total weight of the tractor-implement combination.
Formula for calculating the actual rear axle load of the tractor.
Steps to secure the tractor and implement before any intervention to prevent accidental movement.
Safety warnings and procedures for connecting and disconnecting hydraulic hose lines.
Instructions for correctly coupling hydraulic hose lines, including compatibility and cleanliness checks.
Procedure for safely uncoupling hydraulic hose lines and storing the plugs.
Safety precautions and steps for coupling implements to the tractor, checking parts, and securing them.
Step-by-step guide for coupling the implement to the tractor's three-point hitch and securing it.
Procedure for safely uncoupling the implement from the tractor, including securing markers and lines.
Guidance on setting the seed rate, referencing required values and calibration procedures.
Steps for seeding with normal or fine seed metering wheels, including calibration.
Safety precautions and steps for filling the seed box, including coupling and securing the implement.
Procedure for performing a calibration test to ensure preset and actual seeding rates are equivalent.
Using the calculating disc rule to determine the required gearbox setting for the desired seed rate.
Information on determining gearbox settings for desired seed rates using hydraulic remote control.
Safety instructions and procedures for moving track markers between working and transport positions.
Factors affecting seed placement depth and procedures for adjustment and checking.
Hydraulic adjustment of coulter pressure, including setting the control valve and inserting pins.
Safety instructions for moving tramline markers and detailed steps for working position.
A checklist of steps to prepare the seed drill for transport, including locking markers and folding steps.
Covers national traffic regulations, transport width/height limits, speed, and warning beacon requirements.
Checks and services required before initial commissioning and after the first 10 operating hours.
Step-by-step guide to move the implement from transport to working position, including checks.
Steps for emptying the seed box and housing, including safety precautions and tramline counter settings.
Addresses deviations in seeding rates due to new implements, moist seeds, or incorrect bottom flap settings.
General safety warnings regarding crushing, shearing, and unintentional movement during maintenance.
An overview of maintenance tasks, intervals, and cross-references to relevant sections.
Criteria for inspecting hydraulic hoses and when replacement by a specialist is necessary.
To Next Page