Start-up
D9 BAH0041-4 08.18
97
6 Start-up
This section contains information
on initial operation of your implement.
on how to check if you may mount the implement onto your tractor.
Before operating the implement for the first time the operator
must have read and understood the operating manual.
Follow the instructions given in the section "Safety information
for the operator" when
Coupling and uncoupling the implement
Implement transportation
Use of the implement
Only couple the implement and transport it with a tractor that is
suitable for the task.
The tractor and implement must meet the national road traffic
regulations.
Vehicle owner and vehicle operator are responsible for compli-
ance with the statutory provisions of the national road traffic reg-
ulations.
WARNING
Risk of contusions, cutting, catching, drawing in and knocks in
the area of hydraulically or electrically actuated components.
Do not block the operator controls on the tractor which are used for
hydraulic and electrical movements of components, e.g. folding,
swivelling and pushing movements. The movement must stop auto-
matically when you release the appropriate control. This does not
apply to equipment movements that:
are continuous or
are automatically locked or
require a float position or pressure position due to their function.
To Next Page