Need help?Do you have a question about the Amazone D9-30 Super and is the answer not in the manual?
General| Brand | Amazone |
|---|---|
| Model | D9-30 Super |
| Category | Farm Equipment |
| Language | English |
Operator's duties and manufacturer's liability for machine operation.
Explains the meaning of DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols.
Specifies requirements for personnel working with the machine.
Operate machine only if safety equipment is functional; check daily.
Carry out maintenance in time and secure media against unintentional start-up.
No changes or modifications without manufacturer's authorization.
Explains the structure and meaning of warning pictograms on the machine.
Diagrams showing the arrangement of warning pictograms on the machine.
Consequences of non-compliance with safety information.
General safety guidelines for operating the machine.
Detailed safety points, connecting/disconnecting, and driving.
Safety precautions for the machine's electrical system.
Details on safety features like linch pins and rubber buffers.
Defines the machine's proper use, limitations, and forbidden applications.
Identifies hazardous zones and specific danger points on the machine.
Specifies engine power, electrical, and hydraulic requirements for the tractor.
Step-by-step procedure for connecting hydraulic hoses.
Step-by-step procedure for disconnecting hydraulic hoses.
Methods for setting and adjusting the sowing rate using levers or controls.
Factors affecting planting depth and central adjustment of coulter pressure.
Allows creation of seed-free tramlines for later field operations.
Step-by-step examples for creating tramlines using tables and rhythms.
Ensuring tractor compatibility by checking weight and axle loads.
Calculating required weights and ballast for stability and steering.
Formula for calculating minimum front ballasting for steering capability.
Formula for calculating the actual front axle load.
Formula for calculating the combined total weight of tractor and machine.
Formula for calculating the actual rear axle load.
Safety measures to prevent accidental movement during interventions.
General safety and procedural steps for coupling the machine.
Procedure for connecting hydraulic lines to tractor control units.
Procedure for safely detaching the machine from the tractor.
Procedure for setting the normal and fine seed wheels.
Performing calibration tests to ensure correct sowing rates.
Adjusting sowing rate hydraulically via control valve and gearbox setting.
Procedure for positioning and adjusting the bout markers.
Factors affecting planting depth and adjusting coulter pressure.
Manual adjustment of coulter pressure using an adjuster spindle.
Hydraulic adjustment of coulter pressure via a cylinder.
Procedure to check seed planting depth after adjustments.
Setting the tramline rhythm using pitch and indicator wheels.
Steps to prepare the seed drill for road transport.
Specific instructions for transporting the D9-40 Super model.
Procedure for starting operations, including checks and adjustments.
Troubleshooting a track eradicator boom shearing off due to obstacles.
Troubleshooting discrepancies between set and actual sowing rates.
Safety and maintenance for the hydraulic system.
Adjusting tramline spacing and track width by a specialist.
To Next Page