Cleaning, maintenance and repairs
12.4 Lubrication regulations
Lubricate the machine in accordance with the specifications of the
manufacturer.
Carefully clean the lubrication nipple and grease gun before lubrication
so that no dirt is pressed into the bearings. Press the dirty grease
completely into the bearings and replace it with new grease.
The lubrication points on the machine are
marked with a foil sticker (Fig. 198).
Fig. 198
12.4.1 Lubricants
For lubrication work use a lithium saponified multipurpose grease with
EP additives:
Company Lubricant designation
ARAL Aralub HL2
FINA Marson L2
ESSO Beacon 2
SHELL Retinax A
180 Cirrus BAH0049-1 09.14