10.5.3 Loading the seed hopper from bulk bags
1. Set the Cirrus down on a flat surface.
2. Apply the tractor parking brake, switch off
the tractor engine and remove the ignition
key.
3. Approach the machine carefully with the
bulk bag.
4. Climb onto the loading plate.
5. Unload the bulk bag into the seed hopper.
180
DANGER
Never move between the supply vehicle and the machine.
Never stand under suspended loads.
10.5.4 Enter the filling volume on the AMATRON 3
If the eAMATRON 3xact filling volume is known, enter the filling vol-
ume on the AMATRON 3 (see AMATRON 3 operating manual).
It is then possible to input the amount (kg) remaining in the seed hop-
per in which the level alarm is to be triggered.
The AMATRON 3 triggers an alarm, if
• the theoretically calculated remaining amount is reached an
level sensor is logged off on the AMATRON 3 or
• the level sensor is no longer covered with seed.
160 Cirrus BAH0049-1 09.14
To Next Page
Loading...
Need help?
General
