General Safety Instructions
2.6 User training
Only those people who have been trained and instructed may work
with/on the machine. The operator must clearly specify the responsi-
bilities of the people charged with operation, maintenance and repair
work.
People being trained may only work with/on the machine under the
supervision of an experienced person.
People
Activity
Person special-
activity
1)
Trained person
2)
Person with specialist
training (specialist work-
shop)
3)
Loading/Transport X X X
Commissioning -- X --
Set-up, tool installation -- -- X
Operation -- X --
Maintenance -- -- X
Troubleshooting and fault elimina-
tion
-- X X
Disposal X -- --
Legend: X..allowed --..not allowed
1)
A person who can assume a specific task and who can carry out
this task for an appropriately qualified company.
2)
A person shall be considered as having been instructed, if they
have been instructed in the tasks they have to carry out and in
the possible risks in the case of improper behaviour and also
have been informed about the necessary protective equipment
and measures.
3)
People with specialist technical training shall be considered as a
specialist. Due to their specialist training and their knowledge of
the appropriate regulations, they can evaluate the work with
which they have been charged and detect possible dangers.
Comment:
A qualification equivalent to specialist training can be obtained
through long term activity in the appropriate field of work.
Only a specialist workshop may carry out maintenance and repair
work on the machine, if such work is additionally marked "Workshop".
The personnel of a specialist workshop shall possess the appropriate
knowledge and suitable aids (tools, lifting and support equipment) for
carrying out the maintenance and repair work on the machine in a
way which is both appropriate and safe.
Cirrus BAH0049-1 09.14
15
To Next Page
Loading...
Need help?
General
