Need help?Do you have a question about the Amazone ZA-TS Ultra and is the answer not in the manual?
Outlines operator and user responsibilities for safe machine operation.
Explains the meaning of danger, warning, and caution symbols.
Explains the structure and meaning of warning pictograms on the machine.
Provides critical safety guidelines for operating and interacting with the machine.
Covers general safety, accident prevention, and moving off procedures.
Details safe procedures for connecting and disconnecting the machine to the tractor.
Outlines safety regulations for transporting the machine on public highways.
Describes safety precautions related to the machine's hydraulic system.
Explains safe operation procedures for the PTO shaft and universal joint.
Identifies hazardous zones and specific danger points on and around the machine.
Explains the function of the PTO shaft and the drive shaft with friction clutch.
Provides a step-by-step guide for safely coupling the PTO shaft to the tractor.
Details the safe procedure for uncoupling the PTO shaft from the tractor.
Explains the hydraulic hose line markings and tractor control unit usage.
Guides on safely connecting hydraulic hose lines, checking compatibility and pressure.
Provides instructions for safely disconnecting hydraulic hose lines.
Explains the ArgusTwin system for regulating lateral distribution and compensating wind effects.
Guides on verifying tractor compatibility before connecting the machine, including brake tests.
Details how to calculate tractor weight, axle loads, and required ballast for stability.
Guides on correctly adjusting PTO shaft length to prevent damage and ensure proper operation.
Details essential steps to secure the tractor and machine before any intervention.
Explains how to adjust the implement's hydraulic system to match the tractor's system.
Provides detailed, step-by-step instructions for safely coupling the machine to the tractor.
Details the safe procedure for uncoupling the machine from the tractor.
Guides on setting the correct mounting height for optimal spreading performance.
Explains how to set the desired spread rate using the control terminal and calibration.
Outlines various methods for checking and calibrating the spread rate for accurate application.
Warns about hazards from unintentional release of coupled machines.
Advises switching off the control terminal before road transport.
Emphasizes maintaining tractor control and stability during transport.
Warns about risks related to overloading and improper tractor use during transport.
Warns about hazards from moving machine parts during operation.
Warns about ejected objects and the need for protective equipment.
Advises on safety measures for powered machine elements during operation.
Warns about damage from excessive drive speeds of the PTO shaft.
Emphasizes checking PTO shaft safety devices and maintaining clearance.
Stresses checking pin security to prevent unintentional release.
Advises against loose clothing due to entanglement risks with moving parts.
To Next Page
General