Keeping Your Lockit up to Date (and Time)
Check ambient.de/en/downloads for fi rmware updates.
Your Lockit has an internal buff er battery for the RTC. It will
only deplete when the unit is off with no NP-50 loaded and
last you a long time. Once the Lockit doesn’t hold time it’s
time to replace.
First, get a CR2016 type battery. Remove NP-50 battery,
slightly losen the nut of the antenna socket by a half turn,
and remove the 4 Torx 6 screws on the back. Take off back
cover, and slide out the covering lid as per print. Replace
battery and reassemble in reverse order.
To Next Page
