Need help?Do you have a question about the Ambient Lockit ACN-CL and is the answer not in the manual?
General| Brand | Ambient |
|---|---|
| Model | Lockit ACN-CL |
| Category | Controller |
| Language | English |
Identifies and describes the ACN antenna, LED, display, sockets, buttons, and battery compartment.
Instructions for inserting the NP-50 battery and how the unit charges via USB.
Details on ACN and SYNC socket pin assignments and compatible plugs.
Download software, connect via USB, set frame rate, RTC, and configure power options.
How to use the power button for starting, resetting, and powering down the unit.
Using red and green buttons for mode selection, jamming, and menu control.
Detailed explanations of Standard, Master, and TRX operating modes.
Adjusting settings via the graphical menu, including frame rate, sync format, and ACN channel.
Setting the generator reference and applying configuration changes.
Jamming the generator via cable, ACN, or using the internal reference.
Information on single jam broadcasts, repeated jams in Master mode, and re-jamming prevention.
Explanation of Generator Timecode, Frame Rate, Mode, Battery Level, and other display indicators.
Details on ACN channel assignment following IEEE 802.15.4 LR-WPAN Standard.
Explanation of LED flash and blink codes for different operating modes and events.
Procedure for checking firmware updates and replacing the internal RTC buffer battery.
To Next Page
