Getting Started with Your Lockit
Although not necessary, it is recommended to download
LockitToolbox from ambient.de/en/downloads for Mac or
PC and make initial adjustments. Connect via the supplied
USB-C to A cable and click on “connect”.
Select the desired project frame rate, set the internal
RTC* to local time and load current date formatted either
DD.MM.YY.ED or MM/DD/YY.AD into userbits.
LNA** enhances reception at the cost of battery life.
You can also select to Auto Power on the unit with USB
power applied. Once on, you must power down manually.
Adjust LED brightness and TC Level (ACN port only).
* Real Time Clock, keeps approximate time of day (ToD) and date
** Low Noise Amplifi er
To Next Page
Loading...
