Need help?Do you have a question about the Ambient ACC 501 and is the answer not in the manual?
General| Brand | Ambient |
|---|---|
| Model | ACC 501 |
| Category | Controller |
| Language | English |
Pinout and specifications for the Lemo 5-pin connector for TC.
Description of the Infrared port for data transfer and control.
Details on the BNC input for external sync signals like video.
Description of the BNC output for word clock synchronization.
Information on USB port 1 for programming and serial interface.
Information on USB port 2 for MIDI TC I/O and power.
Details on the 3.5mm mini jack for LTC in/out.
Description of the Sub D 15-pin socket for accessory interface.
Explanation of the keypad layout and functions.
Details about the graphic display, contrast, and backlight.
Instructions for turning the device on.
Options for switching the device off or putting it into standby.
General menu for controller status and peripheral monitoring.
Menu for setting timecode generator parameters.
Menu for handling internal and external LTC timecode.
Menu for sending/receiving timecode via Aaton ASCII protocol.
Menu for changing the status of the MIDI timecode (MTC) generator.
Menu for controlling word clock parameters and generator.
Menu used to tune or calibrate Lockit devices and the controller.
Menu for setting the Real Time Clock parameters.
Details the warranty period and terms for the Clockit Controller ACC501.
States conformity with relevant standards and certifications.
To Next Page
