Need help?Do you have a question about the Ambiente LUNASTAT V2 and is the answer not in the manual?
Operates as a simple thermostat or a fully programmable thermostat with 4 times to set target temperatures daily.
Controls room temperature in conjunction with a central programmer for timed control of larger areas.
Operates as an independent timer control for heating or hot water systems, with 5-minute increments.
Details the various icons and indicators displayed on the thermostat's screen during programmable operation.
Step-by-step guide to set or change the current time and day on the thermostat.
Instructions for temporarily overriding and adjusting the current temperature setting.
Defines pre-programmed comfort levels and provides steps to set or change program comfort levels.
Procedure to set a period of absence, maintaining a lower temperature to save energy.
Allows setting a constant temperature for a specific duration, overriding programmed schedules.
Explains how the feature anticipates heating needs to reach target temperature by the set time.
Explains the display elements and indicators specific to the non-programmable mode.
Guide to adjusting the current temperature, which is held until the next scheduled change.
Details how to set a constant temperature for a specified duration in non-programmable mode.
Illustrates the display elements and indicators visible when the thermostat is in setback mode.
Instructions for modifying the temperature setting, which will be maintained until the next programmed event.
Sets the thermostat to a lower temperature to prevent freezing, indicated by a specific symbol.
Secures the thermostat's controls to prevent accidental adjustments or tampering.
Protects floor heating by stopping it when a pre-set floor temperature limit is reached.
Explains the display elements and indicators specific to the single channel timer mode.
Procedure to set or adjust the current time and day for the timer functions.
Details how to program the specific on and off times for the heating or hot water system.
Allows setting a period of absence to maintain a lower temperature, saving energy.
Enables setting a constant temperature for a specific duration, overriding the timer schedule.
Instructions on how to manually turn off the timer temporarily during an active on period.
Configures sensor input: air, floor, or combined for optimal performance and protection.
Sets display format for time, choosing between 12-hour and 24-hour display.
Selects temperature display unit between Celsius (°C) and Fahrenheit (°F).
Enables frost protection mode, maintaining a minimum temperature even when the unit is off.
Selects operating mode: non-programmable, 5/2 day, or 7 day programmable.
Optimizes heating start time to reach target temperature by the scheduled time.
General| Brand | Ambiente |
|---|---|
| Model | LUNASTAT V2 |
| Category | Thermostat |
| Language | English |
To Next Page
