Ambiente LUNA STAT - User Manual

TUE
MENU OK
ROOM TEMP
AM
18.5
9:30
2
c
LUNA STAT THERMOSTAT MANUAL

Summary

Programmable and Non-Programmable Operation

Set Back Thermostat with Central Programmer

Installation Procedure

Setting Program Mode Selection

Programmable Mode (5+2 and 7 Day)

Setting the Clock and Day

Instructions for adjusting the current time and day settings.

Changing Temperature Settings

Procedure for temporarily overriding the current temperature setting.

Schedule and Comfort Settings

Explains factory default comfort levels and how to change them.

Setting the Holiday Mode

Optimum Start Feature

Non-Programmable Mode

Changing Temperature in Non-Programmable Mode

Instructions for adjusting the temperature setting in non-programmable mode.

Non-Programmable Setback Mode

Changing Temperature in Setback Mode

Procedure to adjust the temperature setting when in setback mode.

Adjusting Setback Temperature

Steps to adjust the built-in temperature setback level.

Features Available on All Program Modes

Frost Protection

Setting the Hold Mode

Floor Limit Protection

Enables setting a maximum floor temperature to protect flooring.

Factory Reset Procedure

Optional Features Explained

Feature 04: Frost Protection

Feature 05: Program Mode

Feature 09: Maximum Temperature

Feature 10: Minimum Temperature

Feature 12: Optimum Start

Feature 14: Floor Temperature Limit

Sets a limit for the floor temperature when using a floor sensor.

Feature 15: Setback Enable

Feature 16: Setback Temperature

Adjusts the temperature setback level for energy saving.

Error Codes and Solutions

Wiring Diagram - Switch Live

Wiring Diagram - Volt Free Switching

Wiring Diagram - UH8 Wiring Centre Connection

Wiring Diagram - Setback Mode UH8 Connection

Ambiente LUNA STAT Specifications

General

Brand	Ambiente
Model	LUNA STAT
Category	Thermostat
Language	English