6
INSTALLATION PROCEDURE
INSTALLATION PROCEDURE
Care should be taken on where the Luna Stat is installed, as
being the ultimate control of your heating it is important that it is
not installed near any secondary hot or cold sources. The Luna
Stat should be installed at chest/eye level (approximately 1.5
metres) and where it will receive an even reading of the
temperature of the room. It should be installed out of direct
sunlight, away from draft or heat sources such as airing
cupboards. The Luna Stat is designed to be mounted flush and
will require an electrical back box with a depth of at least 35mm.
To Next Page
Loading...
