Ambiente LUNA STAT - Page 7

7
INSTALLATION PROCEDURE
Step 1
Separate the two halves of the
thermostat by using a small
flat screwdriver to disengage
the clips in the top edge of
the Luna Stat.
Step 2
Ensure that the front (Screen)
part of the thermostat is kept
somewhere safe and clean.
Terminate the cable for the
thermostat in accordance
with wiring diagrams on pages
40-43.
Step 3
Fix the thermostat back plate
back to the back box with the
screws provided, ensuring this
is secure.
Step 4
Clip the front on to the back
plate engaging the bottom
clips first.