14
CHANGE/CHECK THE TEMPERATURE SETTING
To set/change the temperature (temporary override) follow
these steps. Note, this only changes the temperature until the
next program time.
1. Press
once to view the current temperature setting.
2. Press
repeatedly to change the thermostat in increments
of 0.5
o
C.
3. Press OK to save the new temperature and return to the home
screen. The thermostat will display ‘OVERRIDE’ to confirm a
different temperature has been set.
The
symbol will show when the thermostat is calling for heat.
If a floor sensor has been installed this temperature can be
checked by press and holding the ‘OK’ button. The thermostat
will return to the home screen after 10 seconds.
You can also change the temperature this way in the Frost,
Holiday and Hold modes.
PROGRAMMABLE MODE
(
5+2 AND 7 DAY
)
To Next Page
Loading...
