27
NON
-
PROGRAMMABLE SETBACK MODE
SETBACK TEMPERATURE
The Luna Stat operates a built in temperature set-back when a
timer/ programmer is connected to the Luna stat. This set back
is adjustable using the following steps.
1. Press MENU till the ‘SET SETUP’ main menu item flashes.
2. Press OK 16 times, or until the small digit shows ‘16’.
3. Press
to change the large number for the following modes
03 – 05 = 3
o
C - 6
o
C
4. Press MENU to save the setting and the
button to return to
the home screen.
To Next Page
Loading...
