5
SET BACK THERMOSTAT WITH CENTRAL PROGRAMMER
2. SET BACK THERMOSTAT WITH CENTRAL PROGRAMMER
The Luna Stat operates as temperature control on a room by
room basis in conjunction with a single programmer (supplied
separately) providing central timed control for larger areas or
whole houses.
The Luna Stat is set to non-programmable and maintains the
temperature at the set point whilst the programmer is on. When
the programmer is off the Luna Stat automatically drops the set
temperature by up to 5
o
C for example during the night or whilst
the property is unoccupied.
This enables the operation of an efficient system with simple to
use thermostat and central programmer rather than multiple
thermostats that need programming one at a time.
To Next Page
Loading...
