Need help?Do you have a question about the Ambirad AR35 U and is the answer not in the manual?
General| Brand | Ambirad |
|---|---|
| Model | AR35 U |
| Category | Gas Heater |
| Language | English |
Installation must comply with Gas Safety regulations and I.E.E. standards.
Appliance must be earthed, specifying supply details and wiring standards.
Guide on connecting mains lead wires to the plug terminals.
Table of damper settings for AR Linear Herringbone & DL Heaters.
Table of damper settings for ARE Linear Herringbone & DL Heaters.
Details on fitting a down-draught diverter and flue pipe requirements.
Inspecting installation, electrical, and gas supplies before commissioning.
Steps to follow for the correct start-up sequence and lamp indications.
Procedure for handling and resetting ignition lock-out conditions.
Procedure for setting burner gas pressure using a manometer.
Testing the flame safe guard equipment by isolating the gas supply.
Testing the vacuum proving switch by disconnecting the fan.
Safety precautions before undertaking any repair work.
Detailed steps for replacing the ID fan.
Procedure for removing and refitting the burner/control assembly.
Steps for removing and refitting the electrode assembly.
Steps for removing and refitting the burner head.
Troubleshooting steps for when the burner fails to start.
Troubleshooting for fan start but no burner ignition in HB Herringbone systems.
Troubleshooting for ignition stage issues in HB Herringbone systems.
Troubleshooting steps for when the burner shuts down shortly after lighting.
Step-by-step instructions for starting the heater.
Instructions on how to safely switch off the heater.
To Next Page
