Need help?Do you have a question about the Ambirad AR40 U and is the answer not in the manual?
General| Brand | Ambirad |
|---|---|
| Model | AR40 U |
| Category | Gas Heater |
| Language | English |
Specifies the R1/2 B.S.P thread and provides model-specific gas burning pressure tables.
Emphasizes the installer's sole responsibility for adhering to site safety procedures.
Table of damper settings when hot for AR Linear Herringbone and DL heaters.
Table of damper settings when hot for ARE Linear Herringbone and DL heaters.
Tables of damper settings when hot for AR and ARE U Tube Herringbone heaters.
Table of minimum and recommended mounting heights for various AR/ARE models.
Inspects installation, verifies electrical/gas supplies, and describes the start-up sequence.
Procedures for flame issues, re-ignition attempts, and setting burner gas pressure.
Safety for repairs and step-by-step instructions for replacing the ID fan.
Procedures for removing and refitting the burner assembly and replacing electrodes.
Symptoms, causes, and remedies for burner start-up and ignition problems.
Symptoms, causes, and remedies for burner shutdown or intermittent operation.
To Next Page
