EN
7
• Adjust the collar to the appropriate size by pulling collar apart until the distance between the sizing
line and the collar body equals your finger measurement. (5)
• Engage the locking buttons by pushing down. (6)
• If the collar needs to be resized, disengage the locking buttons by pulling up. (7)
• Pull the ratchet latches out. (8)
• The collar may now be adjusted to the appropriate size. (9)
• Push the ratchet latches in and engage the locking buttons by pushing down. (10,11)
• Before placing the collar on the patient, ensure that the chin piece is flipped to front. (12, 13)
• Wrap the collar around the patients neck. (14, 15, 16, 18, 19, 20)
• Secure the collar using the velcro. (17, 21, 22)
• A nasal airway tubing can be attached to the tube hooks at both sides. (23)
4.0. Disposal
Used products must be disposed off according to local procedures.
To Next Page
Loading...
