7.1. Sub-function Table
F1: Cutter service
Button Usage
Push this button will toggle the cutting blade to the highest and lowest
position for mechanical cutting blade adjustment.
Push this button will exit the cutter service mode and return to previous
mode.
CUT
STOP
F 3: Label memory
Function Display / Description Default value
B1
Load label setting:
Retrieve Saved label setting from memory address
Label setting: label length, label width, length after fold.
Maximum 10 address location.
1
B2
Save label setting:
Save label setting to memory address.
Label setting: label length, label width, length after fold.
Maximum 10 address location.
1
F 5: System setup
Function Display / Description Default Value
C1
View system status:
Display Main board and 3 motor boards current status.
Information includes each board’s software version and
power up status. Status 0 indicates pass, any non-zero implies
some error occurred and will cause machine work improperly
or lock. Please send this code to manufacturer for further
investigation.
NA
C2
Select language:
Change display language.
1 = English
2 = Traditional Chinese
1
© AMC AUTOMATION CO.
P.10
To Next Page
Loading...
General