To Next PageTo Next PageWhy is my Amcor Air Conditioner not working properly?
If your Amcor Air Conditioner isn't working, several factors could be at play. First, ensure all windows and doors are closed. A dirty filter can also hinder performance, so clean or replace it. Check for any blockages at the air inlet or outlet. Finally, verify that the room temperature isn't lower than the temperature you've selected on the unit.
What to do if my Amcor CPLMB-12000E unit does nothing?
If your Amcor Air Conditioner unit isn't turning on, there could be a few reasons: * The overheat protection might be activated. Wait 3 minutes for the temperature to decrease before turning it on again. * Check the power supply. Ensure the outlet works, the green light on the L.C.D.I. plug is on, and press the restart button. * The water container might be full, indicated by a flashing LCD light. Drain the unit. * The timer function might be set. Deactivate the timer function.
How to fix Amcor CPLMB-12000E remote control that is not working?
If your Amcor Air Conditioner remote control isn't working, ensure that you're aiming it directly at the control panel and that you are close enough to the unit. Also, try replacing the batteries, as they may be dead.
General| Brand | Amcor |
|---|---|
| Model | CPLMB-12000E |
| Category | Air Conditioner |
| Language | English |
Steps to power on the air conditioner and initial settings.
Instructions for adjusting the desired cooling temperature.
Using the remote to set the desired room temperature.
Setting start and stop times for the unit using the remote.
Steps for cleaning the unit's upper air filters.
Procedure for cleaning the unit's lower air filter.
